|Type:Cold & Hot Pressing Machine||Automatic Grade:Semi-Automatic|
|Production Capacity:80TD||Place of Origin:Shandong, China (Mainland)+0086 15764119982|
|Brand Name:LDPH||Model Number:80TD|
Description of the 80TD soybean pretreatment process:
raw material use vibration sieve to be cleared through 1#belt conveyor, stoning machine can get rid of impurity ,clod and small stones in raw material. the raw materials reaches magnetizer selector to remove iron. Material arrives the crusher to be crushed into 4-6pcs ,then it go to the Flaker through 2#belt conveyor,it is flaked into flake. Then it arrive at solvent extraction workshop through plane conveyor.
60T/D Soybean Solventing Process
Prepress cake transport to storage tank through plane conveyer.Then arrive at solventing tank through 1# drawing template conveyer and 1# concealed auger.In the solventing tank,the solvent comes from solvent cycle tank completely mix with material through preheat ,then we can get miscella and moisture cake. At the help of dense miscella pump ,miscella reaches net filter,after filter,material reaches 1#,2# miscella tank;through 2# drawing template conveyer and 2# concealed auger,cake arrive at evapo-seperated machine.Solvent gas which comes from soak tank enter condenser,when tranform into liquid ,arrive at water tank.
Dense miscella in the miscella tank,impurity can be seperated through salt out,enter 1st evaporator,2nd evaporator and stripping tower,after evaporation and stripping,rude oil can be get and enter oil refinery through pump;solvent gas arrive at personal condenser solvent directly enter solventing cycle tank through 1st evaporator and 2nd evaporator,the solvent from stripping tower enter water division box,then enter into solventing cycle tank to reuse.
Cake adjusts moisture and temperature in the evapo-seperated machine,then can become finished cake,through auger enter cake tank;wet cake can produce solvent gas through steam,the drip catcher gets rid of cake foam,then enter evapo-separated machine and condenser.After condensation,solvent arrive at water separator firstly,then solvent cycle tank ,in order to cycle use.
Because material can bring air,the free air reaches balancing vessel. After condensation,solvent enters water separator,and the air canât be condensation reaches freeze recycle equipment ,at last the gas is evacuated.
15T/D cooking oil Refinery
the line is adopted the physical refining method, which is not only much more economical and efficient than chemical refining, but also causes no pollution through waste water and exhaust air.
Preheating the crude oil filtered for 45 degrees orso, then adds the phosphoric acid (less than 0.2%) and mixing for 15 mins orso in 90 degrees.
And use the hot water washing and settle for more than 2 hours ,in order to remove out the oil dregs/soaps.
Pump the oil degummed into decolorizer vessel , samely open the vacuum system to rise its temperature to remove off the balance moisture , the temperature is 115 degrees ,to put into the mixture of crude oil and clay, mixing for 30 mins , then reduce the temperature to 70 degrees, and close the vacuum and filter the clay with oil filter, to get the oil decolorized .
Note: This process could remove out 40% red color,the more is removed out from the distilling process .
Pump the oil decolorized into the distilling vessel in the high vacuum, and 240 degrees â260degrees oil temperature, to distillate for 4hrs .
The FFA would be remove out with the direct steams.
The final oil is out after exchanging between hot oil distilled and oil decolorized.
Note: This process is not only remove out the FFA ,but also odor and most of red color / Hot sensitive decolorization.
Transmit hot oil furnace
The furnace is an organic carrier heating furnace with normal liquid oil for the medium; the fuel could be coal and diesel oil, waste oil. The hot temperature oil pump forcedly convey the hot oil recycle into the using system, realize to transmit the heats indirectly from the furnace to using system.
The important is that the furnace is not high pressure boiler, to reduce the inspecting cost every year.
small machine, we support TNT, DHL, FedEx,UPS.
Big machine, we support delivery by ship.
We can also deliver the machine to your agent in china if you have.
1. We guarantee the item is “brand new”, never been used and in perfect working condition.Every item will be tested carefully before shipping out.
2. Sometimes due to the mishandling in transportation, some parts may loose, the machine will not work properly.In this case, please be patient, we will tell how to do it.
3. How to deal with product damage: if the package arrives in bad condition, please take packaging pictures before unpacking, and check the goods in front of the staff of shipping company, in case it is damaged in transportation due to rude handling. contact us within 3 days if the product damaged, and please allow time for us to handle with the problems, we will try our best to solve it.
Shandong Leader Machinery Co.,ltd.'s after-sales service
For the whole 80T/D Soybean Oil Equipment/edible oil processing plant,warranty is 12 months,within 12 months,if have equipment quality problems,we will provide accessories freely. After the expiration of the warranty period,if have spare parts problem,we only receive the cost of required replacement parts.We commit we will provide free technical support of equipment all whole life.
welcome to enquiry!
Our company has engaged in producing and exporting 80T/D Soybean Oil Equipment/edible oil processing plant for many years, and until now, our machine has exported to overseas market, such as Brazil, India, Indonesia, Russia, Thailand and so on, and get the foreign customers' unanimous praise.
Shandong Leader Machinery Co.,ltd. equipment installation, commissioning of the date of the beginning, 12 months for the quality of warranty, life-long technical services. As the equipment is non-standard equipment, the above is for reference only, welcome new and old customers call us or visit our company directly to discuss cooperation.
We believe that you purchase Shandong Leader Machinery Co.,ltd. 80T/D Soybean Oil Equipment/edible oil processing plant is your best and sensible choice.
TEL: +86 0531 85064681
PHONE: +0086 15764119982(ALSO WHATSAPP & WECHAT)
Copyright © 2017 - 2018Shandong Leader Machinery Co.,ltd. All Rights Reserved