English
Home >  seed dehulling machine >  Advanced mung bean decorticating machine/ decorticator
Advanced mung bean decorticating machine/ decorticator

Advanced mung bean decorticating machine/ decorticator

Product Group M06110 EAN 0782475997909 Housing Configuration 1 Piece Solid Pilot Configuration No Pilot Weight / LBS 4.211 Cartridge Pilot Depth 0 Inch |...
Product Groups
see more

Miss Anna

Mobile : +0086 15764119982(Also Whatsapp&Wechat)

Tel : 86-0531-85064681

Request a quote

Address:No.15, Lanxiang Road, Tianqiao District, Ji'nan, Shandong, China

Product Details

Nominal Bolt Circle Diameter Round:6.9 Inch | 175.3 Mil Category:Flange Block
Brand:QM INDUSTRIES UNSPSC:31171501
Harmonized Tariff Code:8483.20.40.80 Minimum Buy Quantity:N/A
Inch - Metric:Metric Housing Material:Cast Steel
Noun:Bearing

Product Description

Product GroupM06110
EAN0782475997909
Housing Configuration1 Piece Solid
Pilot ConfigurationNo Pilot
Weight / LBS4.211
Cartridge Pilot Depth0 Inch | 0 Millimete
Rolling ElementBall Bearing
Long Description4 Bolt Flange Block;
Expansion / Non-expansionNon-expansion
NounBearing

Frequently Asked Questions - Advanced mung bean decorticating machine/ decorticator


A420.5 mm
C07.88 kN
J92 mm
A229 mm
B27 mm
C14 kN
T min.-40 °C
s113.5 mm
Designation of housingFEE205-
Weight0.76 kg

Frequently Asked Questions - Advanced mung bean decorticating machine/ decorticator


d2 ≈65.263 mm
Basic dynamic load rating C46.2 kN
d55 mm
Limiting speed4300 r/min
D2 ≈90.45 mm
da max.64.9 mm
Da max.91 mm
B21 mm
D100 mm
ra max.1.5 mm

Frequently Asked Questions - Advanced mung bean decorticating machine/ decorticator


  • almond inshell shellers TFXH500

    Snap ring Seeger:SW 230; D3:226 mm; Snap ring in accordance with DIN 471:230x5; r3,4 min.:0.6 mm; r min.:1.8 mm; b1:7 mm; b:5.2 mm; Basic static load rating C0:1060 kN;   +:0.2 mm; C1:71.2 mm;
    Read More ...
  • 2013 Hot sale sunflower seed dehulling machine TFKH series

    Snap ring Seeger:SW 230; D3:226 mm; Snap ring in accordance with DIN 471:230x5; r3,4 min.:0.6 mm; r min.:1.8 mm; b1:7 mm; b:5.2 mm; Basic static load rating C0:1060 kN;   +:0.2 mm; C1:71.2 mm;
    Read More ...
  • job's tears dehulling&separating equipment TFYM400

    Max. speed for contact seal:3400 r/min; Cap bolt recommended tightening torque:149.1 N·m; RG:1/8 NPT; J max.:228.6 mm; PG:1/8 NPT; A1:69.85 mm; Cap bolt, SAE grade:8; H:147.637 mm; P60°:39.1 kN; Bearing:1310 EKTN9;
    Read More ...
  • 2013 Hot sale sunflower seed hulling machine TFKH1200

    d1 ≈:935 mm; r1,2 min.:4.8 mm; T:889 mm; Fatigue load limit Pu:4750 kN; Mass bearing:3470 kg; Calculation factor e:0.33; r3,4 min.:12.7 mm; Calculation factor Y2:3; Thrust factor K:1.76; Design variant/feature:TQO.1/GWI;
    Read More ...
  • complete set buckwheats shellers CTQM1000

    d2 max.:75 mm; α:6 °; d:30 mm; l3 min.:45 mm; l5 ≈:19 mm; Specific dynamic load factor K:100 N/mm²; G:M 30x2; l7 min.:36 mm; Material constant KM:330; r1 min.:0.6 mm;
    Read More ...
  • pinenuts dehulling&separating equipment TFSZ150

    d2 max.:75 mm; α:6 °; d:30 mm; l3 min.:45 mm; l5 ≈:19 mm; Specific dynamic load factor K:100 N/mm²; G:M 30x2; l7 min.:36 mm; Material constant KM:330; r1 min.:0.6 mm;
    Read More ...
  • 2013 Hot sale sunflower seed hulling machine TFKH1200

    Eye bolt:2 x 1/2-13 UNC; ba:90.487 mm; Housing:SAF 544; J min.:628.65 mm; da:200.025 mm; Da:399.999 mm; P120°:160 kN; Max. speed for Taconite seal:385 r/min; RG:1 NPT; J1:133.35 mm;
    Read More ...
  • Strong structure sunflower seed hulling machine TFKH1200

    Eye bolt:2 x 1/2-13 UNC; ba:90.487 mm; Housing:SAF 544; J min.:628.65 mm; da:200.025 mm; Da:399.999 mm; P120°:160 kN; Max. speed for Taconite seal:385 r/min; RG:1 NPT; J1:133.35 mm;
    Read More ...
  • castor beans dehulling machine TFBM300

    Snap ring Seeger:SW 230; D3:226 mm; Snap ring in accordance with DIN 471:230x5; r3,4 min.:0.6 mm; r min.:1.8 mm; b1:7 mm; b:5.2 mm; Basic static load rating C0:1060 kN;   +:0.2 mm; C1:71.2 mm;
    Read More ...
  • foxnut dehulling equipment TFQS300

    d:50.000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:4300 rpm; Basic Dynamic Radial Load Rating C:61800 N; B:27.00 mm; Grease Speed Rating n1:6300 rpm; D:110.0000 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Accessories:Two Seals; Oil Speed Rating n2:7500 rpm;
    Read More ...
  • job's tears shellers TFYM400

    Insert Bearing IB:ZMaRC; Dimension C:3.0000 in; Dimension S1:0.7188 in; Weight W:0.81 lb; Shaft Diameter D:3/4 in; Dimension H:1.0625 in; Width A:1.3750 in; Basic Static Radial Load Rating Co:1470 lbf; Basic Dynamic Radial Load Rating:2860 lbf; Pin Dia A1:0.5313 in;
    Read More ...
  • 2014 job's tears dehulling machine TFYM400

    d2 ≈:438 mm; Calculation factor Y1:2.3; Limiting speed:160 r/min; D:620 mm; D1 ≈:573 mm; d:380 mm; B:194 mm; Calculation factor Y2:3.4; Calculation factor e:0.3; Mass bearing:225 kg;
    Read More ...
  • dehuller

    B5:112 mm; Mass bearing + sleeve:520 kg; Reference speed:450 r/min; Operating clearance factor k2:0.098; s1 max.:30.7 mm; d3:830 mm; Ca min.:2.7 mm; ra max.:5 mm; db min.:732 mm; Basic static load rating C0:12500 kN;
    Read More ...
  • buckwheat peeler

    B5:112 mm; Mass bearing + sleeve:520 kg; Reference speed:450 r/min; Operating clearance factor k2:0.098; s1 max.:30.7 mm; d3:830 mm; Ca min.:2.7 mm; ra max.:5 mm; db min.:732 mm; Basic static load rating C0:12500 kN;
    Read More ...
  • buckwheat huller

    Max. speed for contact seal:3400 r/min; Cap bolt recommended tightening torque:149.1 N·m; RG:1/8 NPT; J max.:228.6 mm; PG:1/8 NPT; A1:69.85 mm; Cap bolt, SAE grade:8; H:147.637 mm; P60°:39.1 kN; Bearing:1310 EKTN9;
    Read More ...

Related News

Related Products

Shandong Leader Machinery Co.,ltd.
Mobile : +0086 15764119982(Also Whatsapp&Wechat)
Website : www.gamehour.org
Telephone : 86-0531-85064681
Mail : sales6@ldfoodmachine.com
Fax : 86-0531-85064682
Address : No.15, Lanxiang Road, Tianqiao District, Ji'nan, Shandong, China

Copyright © 2017 - 2020Shandong Leader Machinery Co.,ltd. All Rights Reserved